Reflex Silver Caddy (66)
-
- Caddy2k Groupie
- Posts: 31
- Joined: Thu Dec 30, 2021 11:53 pm
- Engine size/power: 2.0 TDI (140bhp)
Re: Reflex Silver Caddy (66)
Hi pal did you fit a reversing camra
- Dav02
- Twin Turbo poster
- Posts: 392
- Joined: Thu Aug 09, 2018 10:11 pm
- Location: Lake District
Re: Reflex Silver Caddy (66)
No it’s just a fill, not hinged.
- Dav02
- Twin Turbo poster
- Posts: 392
- Joined: Thu Aug 09, 2018 10:11 pm
- Location: Lake District
Re: Reflex Silver Caddy (66)
No I haven’t. But I think you now have a link to someone who has.
- Dav02
- Twin Turbo poster
- Posts: 392
- Joined: Thu Aug 09, 2018 10:11 pm
- Location: Lake District
Re: Reflex Silver Caddy (66)
Changed the front coilovers to one’s that had camber adjustment. Previously I was scrubbing the inside on the tyres. Had it tracked numerous times but it was still happening. So hopefully this corrects that problem. Plus they are an upgrade from the old one’s.
-
- Caddy2k Groupie
- Posts: 34
- Joined: Sun Mar 14, 2021 11:14 pm
Re: Reflex Silver Caddy (66)
They look like MeisterRs?
They’re very, very good if so. I’ve had a couple of sets in the past, including a set that I sold to a friend who put another 80k on them with no issues.
They’re very, very good if so. I’ve had a couple of sets in the past, including a set that I sold to a friend who put another 80k on them with no issues.
- Dav02
- Twin Turbo poster
- Posts: 392
- Joined: Thu Aug 09, 2018 10:11 pm
- Location: Lake District
Re: Reflex Silver Caddy (66)
You are correctsendgineer wrote: ↑Thu Feb 17, 2022 4:29 pm They look like MeisterRs?
They’re very, very good if so. I’ve had a couple of sets in the past, including a set that I sold to a friend who put another 80k on them with no issues.
I should have listed what they were, but you've guessed it anyway
- Dav02
- Twin Turbo poster
- Posts: 392
- Joined: Thu Aug 09, 2018 10:11 pm
- Location: Lake District
Re: Reflex Silver Caddy (66)
Couple more changes.
Made some mudflaps as they are a must living in Cumbria. The OEM one’s got smashed to bits with the van being lowered.
I forgot to take photos when just fitted and clean. But I guess it shows why I need them so much.
And to finish off the suspension setup a new set of wheels went on and then all tracked up. Drives brilliant now.
*EDIT*
Forgot to mention wheel size
19 x 8.5j et45
Made some mudflaps as they are a must living in Cumbria. The OEM one’s got smashed to bits with the van being lowered.
I forgot to take photos when just fitted and clean. But I guess it shows why I need them so much.
And to finish off the suspension setup a new set of wheels went on and then all tracked up. Drives brilliant now.
*EDIT*
Forgot to mention wheel size
19 x 8.5j et45
Last edited by Dav02 on Sat Mar 12, 2022 8:14 pm, edited 1 time in total.
- Simon_B
- 100BHP+
- Posts: 114
- Joined: Tue Mar 01, 2022 11:05 am
- Location: Essex
Re: Reflex Silver Caddy (66)
Nice, do like them side mouldings.
Sent from my SM-G981B using Tapatalk
Sent from my SM-G981B using Tapatalk
Mk4 Highline 2.0 TDI.
- Dav02
- Twin Turbo poster
- Posts: 392
- Joined: Thu Aug 09, 2018 10:11 pm
- Location: Lake District
Re: Reflex Silver Caddy (66)
Thanks m8.
Yeah I really like them, being silver they really stand out. Well, to the trained eye anyway. The non car enthusiast don't notice these things, wierdo's
Yeah I really like them, being silver they really stand out. Well, to the trained eye anyway. The non car enthusiast don't notice these things, wierdo's
- Dav02
- Twin Turbo poster
- Posts: 392
- Joined: Thu Aug 09, 2018 10:11 pm
- Location: Lake District
Re: Reflex Silver Caddy (66)
Really should have had these fitted some time ago.
Wobble blocks fitted to the rear hangers
Wobble blocks fitted to the rear hangers
- Dav02
- Twin Turbo poster
- Posts: 392
- Joined: Thu Aug 09, 2018 10:11 pm
- Location: Lake District
Re: Reflex Silver Caddy (66)
Knocked together some wheel nut covers for the new wheels.
Some used shotgun cartridges cut down, polished and a couple of layers of lacquer.
Just need to sort some small locking wheel nuts as they were a bit to big for the shotgun cartridges.
Some used shotgun cartridges cut down, polished and a couple of layers of lacquer.
Just need to sort some small locking wheel nuts as they were a bit to big for the shotgun cartridges.
-
- Caddy Fan
- Posts: 63
- Joined: Wed Mar 04, 2020 2:40 pm
- Engine size/power: 2.0 SDI (70bhp)
Re: Reflex Silver Caddy (66)
I love the bolt covers chap, going to copy that!
06 sdi caddy2k :: 81 Transporter T3 :: 2015 Golf 1.4 TSI :: Freelander (sorry)
Herefordshire and all over.
Herefordshire and all over.
- Simon_B
- 100BHP+
- Posts: 114
- Joined: Tue Mar 01, 2022 11:05 am
- Location: Essex
-
- Caddy2k Groupie
- Posts: 12
- Joined: Sun Jul 03, 2011 10:42 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Reflex Silver Caddy (66)
Love the wheels ...
- Dav02
- Twin Turbo poster
- Posts: 392
- Joined: Thu Aug 09, 2018 10:11 pm
- Location: Lake District
Re: Reflex Silver Caddy (66)
Cheers all