Seeing if anyone can give some information on these codes below could it be an ECU fault causing it or just separate wiring faults. Cam sensor has been changed, timing has been checked it's had a new glow plug control module and still getting the faults.
01-Engine Management
00833-Camshaft Position Sensor (G40): Implausible Signal P0341
01668- Glow Plug Control Module (J179) Implausible Signal
P0684 Intermittent.
00770- Cylinder 2 Misfire Detected P0302 - Intermittent.
Mk3 caddy wiring or ECU issue
-
Jordan_vw
- Caddy2k Groupie
- Posts: 1
- Joined: Tue Jan 30, 2024 6:02 pm
- Engine size/power: 1.9 TDI (104bhp)
-
Sausage
- Caddy2k Groupie
- Posts: 33
- Joined: Sat Jan 27, 2024 9:16 pm
- Engine size/power: 1.6 CR TDI (102bhp)
Re: Mk3 caddy wiring or ECU issue
It could be either wiring, ecu or individual faults, a simple check would be have a look inside the ecu plug and check for any water ingress or corrosion.
If that’s all the clear book it in with an auto electrician or if your handy with a multimeter it might be worth doing some wiring checks before firing the parts cannon at it.
If that’s all the clear book it in with an auto electrician or if your handy with a multimeter it might be worth doing some wiring checks before firing the parts cannon at it.