I'm doing this conversion at the min.
I've swapped the ecu over end also the steering rack/subframe
I've been told I need to swap some wires over in fuse box. Could I just swap the fusebox from the tauran.
Which wires did you change for the vac solenoid?
Bls to bkd caddy
-
Stackcaddy
- Caddy2k Groupie
- Posts: 5
- Joined: Sun May 31, 2020 9:06 am
- Engine size/power: 1.9 TDI (104bhp)
-
deano83
- Caddy2k Groupie
- Posts: 8
- Joined: Wed Jan 10, 2024 8:25 am
Re: Bls to bkd caddy
how did you get on with the wires ive got the vac box with 6 wires but need to know what pins are for the n75 on my bkd ecu i will do away with the vac box and use n7t when i know which wires i need thanks
-
Charliemuttley
- Caddy2k Groupie
- Posts: 2
- Joined: Tue Apr 30, 2024 9:35 pm
- Engine size/power: 1.9 TDI (104bhp)
Re: Bls to bkd caddy
I don't suppose there is a detailed answer to this boost vacuum wiring issue is there as I have just purchased, by accident, a Caddy that has had this conversion done, but the boost solenoid hasn't been wired in and I have have a two pin plug...... cheers
-
Caddy Rob
- Caddy2k Groupie
- Posts: 16
- Joined: Mon Aug 11, 2025 10:20 pm
- Engine size/power: 2.0 SDI (70bhp)
Re: Bls to bkd caddy
Sean2800 wrote: ↑Thu Feb 17, 2022 6:09 pm
Some progress made today while stud for parts. Swapped the alternator mount from the bls to the bkd to house the power steering pump and got the wiring loom and water pipes back on
Do you have a part number for the bracket?
Don’t fancy having electric power steering like on the touran donor I’m using and the caddy bracket (sdi) doesn’t look like it’ll fit!
Is the wheel for the timing belt attached permanently to the bracket can’t see how it comes off!
Sent from my iPhone using Tapatalk

