CADDY2K.com

Glen G wrote: ↑Sun May 20, 2018 11:10 am Good job so far bud looking forward to seeing more

thanks glen lots more planned but money or lack of is my problem at the min

Liam wrote: ↑Sun May 20, 2018 12:47 pm thanks glen lots more planned but money or lack of is my problem at the min

Right there with you on that one

Not much of an update but the german style plates arrived yesterday

gonna try organise a remap with joe power today





Sent from my iPhone using Tapatalk

Remap organised for this friday but in the mean time i fitted my bike mount that i picked up off amazon for €25 i added an extra piece of timber under the bracket so that it would give me extra support on the floor and more surface area to screw down as i didnt want screwing down through the metal floor of the van so now instead of 2 screws holding it to 12.5mm of ply i have 6 screws holding it to 25mm ply i also carpeted it just to tidy it up




Sent from my iPhone using Tapatalk

I like the bike mount have you got a link to it? Is the 25mm ply fitted to the floor?

Sent from my SM-G928F using Tapatalk

It’s going to get dirty‍♂️‍♂️‍♂️‍♂️‍♀️‍♀️


Sent from my iPhone using Tapatalk

Caddyluv wrote: ↑Tue Jun 05, 2018 12:21 pm It’s going to get dirty‍♂️‍♂️‍♂️‍♂️‍♀️‍♀️


Sent from my iPhone using Tapatalk

it wont get used

Afield23 wrote: ↑Tue Jun 05, 2018 11:42 am I like the bike mount have you got a link to it? Is the 25mm ply fitted to the floor?

Sent from my SM-G928F using Tapatalk

Delta Unisex Hitch Pro Travel Mount for Bike, Black, 600 ml https://www.amazon.co.uk/dp/B000ACAM7E/ ... fBbEVCSVA0


ive a sheet of 12.5 mm ply on floor its not bonded down but its a tight fit it has insulation under it and carpet on top then i added this extra piece of 12.5 mm ply its also carpetted so about 30mm total

Ah I see yeah that makes sense. I've just purchased a slightly different one because I have 15mm axle, same brand though so thanks for the link. I'm thinking about mounting it to a thick piece of wood that fits the width of the van so I don't need to fix it to the floor. Should work I think.

Sent from my SM-G928F using Tapatalk

Afield23 wrote: ↑Tue Jun 05, 2018 12:40 pm Ah I see yeah that makes sense. I've just purchased a slightly different one because I have 15mm axle, same brand though so thanks for the link. I'm thinking about mounting it to a thick piece of wood that fits the width of the van so I don't need to fix it to the floor. Should work I think.

Sent from my SM-G928F using Tapatalk

yea i had the same idea so it could be removeable u could also add a second one on same timber

Tackled a wireless charger today the wireless charging cradle i had, decided to become all loose and wonky so i dismantled it and used it as the basis for my wireless charge pad


put some tech 7 bond on the charger to hold it in place then fitted a piece of wood to hold it til the bond set



converted a 2amp 12v usb adapter into a wired version and wired it up to a fused supply from the ignition side of the fuse panel under the steering column


earth point taken off the bolt at the gear stick





all done


Sent from my iPhone using Tapatalk

Well done. That’s to scary for me. I could see in my future.


Sent from my iPhone using Tapatalk

its simple enough but a matter of fusing correctly with a low amp fuse and making good connections - this pad has been well tested over past few months so i know its a safe one ive had cheap wireless chargers before that overheated so didnt want that happening here

Sounds good. It’s not at the top of my list but I think I should do it.


Sent from my iPhone using Tapatalk

its just convenient im going to order the rubber phone insert instead of the carpet but it will do for now