CADDY2K.com

Thanks very much matey, glad you like it

There was one in the for sale section, it may have gone now. It's a motexion bulkhead, search on here, and you should find some info.

Thanks mate. Looks like I missed that one in the for sale section, I'll keep my eye out now I know what it's called.

I presume it's just a straight swap when fitting?

Reading the whole thread would have told you what you wanted to know!

Klenk wrote:Hi matey, it's a motexion Bulkhead, if you seach on here you'll find more info, i can safely say it's one of the best things i've bought, although it was'nt the easiest/perfect part to fit, having the window is 100% better, especially when using rear view mirror, also keeps the heat/cold in the cabin.

Thanks for quote Doc but that doesn't really help! I wanted to know if its a straight swap ie bolt off bolt on, or does any trim need cutting/removing/adding etc or anything else for that matter.

deank60 wrote: Just wondered where you got that bulkhead from?

Hmmmmm, not how your question sounded then!

No worries, As far as I remember it wasn't the easiest fit, I think it needed trimming slightly.

But each one may be different, some may go straight in, and others may not.





Also on a side note, the noise that was coming from the rear of my van has now been sorted.

After replacing the shocks, and the rear brake carriers and stripping other parts etc, and it not curing the problem, we stripped some of the rear suspension again and gave the watts linkage a good clean, as there was a fair amount of grit/dirt in there, also the ball joints on the levelling arms for the suspension were worn, so we replaced all those with stainless ones, slightly different to the previous ones, and the banging etc has now gone.

Thanks for the info klenk, much appreciated.

Doc, didn't realize you was referring to that question, but again the quote you gave didn't help, I wondered where Klenk got his from as I am struggling to find suppliers.

It's Motexion, and it comes from........... Motexion
Mine was a very easy fit, took all of 20 mins to strip the old one out and new one in.
This thread has the UK distributers email address in

Got there in the end........cheers!