Page 4 of 10

Re: JD's Caddy Build

Posted: Tue Jun 26, 2018 11:00 pm
by Liam
making great progress there JD

Re: JD's Caddy Build

Posted: Wed Jun 27, 2018 9:15 am
by JD2k
Whitey wrote: ↑Tue Jun 26, 2018 2:10 pm Hopefully brooneyes solution will work. I found that CarPlay would drop out if using either usb extensions or cheap usb leads from the Headinit. I ended up buying a belkin usb lead which was only a couple of quid more than a cheapy. No problems since :)


Sent from my iPhone using Tapatalk
Swapped out the long cheap iPhone cable I was using for an apple one and that's sorted it! Thanks guys

Re: JD's Caddy Build

Posted: Wed Jun 27, 2018 9:22 am
by JD2k
Liam wrote: ↑Tue Jun 26, 2018 11:00 pm making great progress there JD
Thanks Liam, getting closer to finishing things off on the inside. Going to try tackle painting the light grey trim and headliner next!

Re: JD's Caddy Build

Posted: Wed Jun 27, 2018 9:57 am
by Caddyluv
Never be finished there will always be another project.


Sent from my iPhone using Tapatalk

Re: JD's Caddy Build

Posted: Wed Jun 27, 2018 10:33 am
by JD2k
Very true! it's a never ending process but an enjoyable one ( and expensive) :)

Re: JD's Caddy Build

Posted: Sat Jul 07, 2018 2:42 pm
by JD2k
Camping prep underway! New bed arrived today.. few little tweaks and it should fit like a gloveImage Need to sort out a split relay system for a leisure battery next Image
Image

Re: JD's Caddy Build

Posted: Sat Jul 07, 2018 2:51 pm
by lewi_grf
Nice van, love the carpeted out back

JD's Caddy Build

Posted: Fri Jul 13, 2018 9:42 pm
by JD2k
Fitted some MK5 Gti pedals today... a lot of messing around trying to get the accelerator pedal in but they’re in! (Excuse the dirty mat)
Image

Re: JD's Caddy Build

Posted: Sat Jul 14, 2018 9:38 am
by Oddy8911
Seats are looking great

Re: JD's Caddy Build

Posted: Fri Jul 27, 2018 6:58 pm
by JD2k
Another job ticked off the listImage
Audi S3 8V air vents fitted... not totally happy with the fitment but they’re in for now
ImageImageImage

Re: JD's Caddy Build

Posted: Fri Jul 27, 2018 8:04 pm
by JD2k
Tomorrow’s job... connect up a 115ah leisure battery with a split charge relay kit.. then fit a 600W inverter Image️

Image

Re: JD's Caddy Build

Posted: Fri Jul 27, 2018 9:20 pm
by caddychris2002
JD2k wrote:Tomorrow’s job... connect up a 115ah leisure battery with a split charge relay kit.. then fit a 600W inverter Image️

Image
Where did you get the kit from pal

Sent from my SM-G950F using Tapatalk


JD's Caddy Build

Posted: Fri Jul 27, 2018 9:33 pm
by JD2k
Hi mate, got the kit from Simply Split Charge.. they’ve got loads of different kits on their online store.
I went for this one after seeing it posted on the forum. It comes with everything you need, even a drill bit and screws to fix the fuse box. The instructions are really detailed and easy to followImage
http://www.simplysplitcharge.co.uk/stor ... duct_id=75


Re: JD's Caddy Build

Posted: Sun Jul 29, 2018 11:16 pm
by The polisher
JD2k wrote: ↑Mon Jun 25, 2018 9:48 pm After a long wait these finally arrived from eBay.. Need to figure out how to connect the aux port as it’s got an input for a RCD310 cable.. The USB port also seems to disconnect my apple car play connection after a minute or so but there’s still power.. So a little tweaking to do but at least they look better than blanksImage
Image
w

Don't know if this will help but I found that if I used an after market cable on my CarPlay USB it would cut out after a few mins then I was told that the CarPlay like if you use the original iPhone cable to plug in. ,I got a original cable and all works well now , just in case

Re: JD's Caddy Build

Posted: Mon Jul 30, 2018 12:32 am
by JD2k
Thanks, yeah I swapped out the USB cable I was using for the apple one and that sorted it