SWB MK3 1.9TDi Build thread

Show off your caddy
The_Evil
Caddy2k Groupie
Posts: 42
Joined: Sun Sep 08, 2019 11:07 pm
Engine size/power: 2.0 CNG (107bhp)

Re: SWB MK3 1.9TDi Build thread

Post by The_Evil »

@neil278 I have almost everything in this list, exception for the looms and relay for the compressor, part of the wiring from the Climatronic to the car control unit, a couple of temp sensors and the sunlight sensor.
Ah, is the double fan mandatory for the cooling radiator?
Last edited by Giddy on Sat Dec 11, 2021 10:43 am, edited 1 time in total.
Reason: removed unnecessary quote
User avatar
neil278
100BHP+
Posts: 148
Joined: Sat Aug 17, 2019 7:29 pm
Engine size/power: 1.9 TDI (104bhp)

Re: SWB MK3 1.9TDi Build thread

Post by neil278 »

I haven’t fitted the double rad fan. On looking at cars being broken on eBay I see both fitted to cars with ac so decided not to
The_Evil
Caddy2k Groupie
Posts: 42
Joined: Sun Sep 08, 2019 11:07 pm
Engine size/power: 2.0 CNG (107bhp)

Re: SWB MK3 1.9TDi Build thread

Post by The_Evil »

Yeah, I think I read here around that it's optional, but probably a good idea for the summer italian temperatures! ;-)
The_Evil
Caddy2k Groupie
Posts: 42
Joined: Sun Sep 08, 2019 11:07 pm
Engine size/power: 2.0 CNG (107bhp)

Re: SWB MK3 1.9TDi Build thread

Post by The_Evil »

Neil, please don't hate me with my tedious questions...
How did you connect the Climatic to the Can bus?
User avatar
neil278
100BHP+
Posts: 148
Joined: Sat Aug 17, 2019 7:29 pm
Engine size/power: 1.9 TDI (104bhp)

Re: SWB MK3 1.9TDi Build thread

Post by neil278 »

Can bus is the orange/brown and orange/green
Mancwebby
Caddy2k Groupie
Posts: 37
Joined: Tue Sep 01, 2020 9:49 pm
Engine size/power: 1.6 CR TDI (102bhp)

Re: SWB MK3 1.9TDi Build thread

Post by Mancwebby »

Outstanding where best place for head unit upgrade
User avatar
neil278
100BHP+
Posts: 148
Joined: Sat Aug 17, 2019 7:29 pm
Engine size/power: 1.9 TDI (104bhp)

Re: SWB MK3 1.9TDi Build thread

Post by neil278 »

Cheers ;) good old eBay, just avoid the RCD360 it looks the same but it’s just a copy
Lomax
Caddy2k Groupie
Posts: 4
Joined: Tue Apr 05, 2022 2:26 pm

Re: SWB MK3 1.9TDi Build thread

Post by Lomax »

Hi Neil,

I hope you can help. I came across this thread following watching a YouTube vid where you are mentioned.

I have a caddy with touran door cards and the central locking isn’t working. I went to follow the guide on what pins to move around and found out that this had already been tampered with and I currently don’t have a starting point. I think the white wires are numbered. Would you know what white wire goes where on each drivers / passenger side?
Jamk
Caddy Fan
Posts: 98
Joined: Fri Oct 11, 2019 8:13 pm
Engine size/power: 1.6 CR TDI (102bhp)

Re: SWB MK3 1.9TDi Build thread

Post by Jamk »

neil278 wrote: Thu Aug 27, 2020 6:08 pm Move pin 11 to 12 - pin 13 to 16 (this wire not present on passenger side) - pin 7 to 6 - pin 15 to 7 and pin 16 to 13. The red and yellow wire from position 12 now needs to go into 18.

Door modules were 5K0 959 792 on the passenger side and 5K0 956 793 on the drivers side

Now everything is working as it should :D just need to get the door cards cleaned up and fitted, then upload some pictures but it’s now pissing it down :?
This post saved my day, you legend 👍🏻
(I have a 2011 caddy with 2007 door modules but was just what I needed to get the re-pinning done) central locking/mirrors and windows now sorted
Cheers
cyderspace
Caddy2k Groupie
Posts: 29
Joined: Mon May 01, 2023 6:09 pm
Engine size/power: 1.6 CR TDI (102bhp)

Re: SWB MK3 1.9TDi Build thread

Post by cyderspace »

neil278 wrote: Thu Aug 27, 2020 6:08 pm Move pin 11 to 12 - pin 13 to 16 (this wire not present on passenger side) - pin 7 to 6 - pin 15 to 7 and pin 16 to 13. The red and yellow wire from position 12 now needs to go into 18.

Door modules were 5K0 959 792 on the passenger side and 5K0 956 793 on the drivers side

Now everything is working as it should :D just need to get the door cards cleaned up and fitted, then upload some pictures but it’s now pissing it down :?
Just want to say - a massive thanks to you for this re-pinning info. Without this I would have been stuffed. Amazing!

In my case I used it to change from the old 1K0 959 793 door module on my 2013 Caddy which had the white wiring numbered from factory - to the new 5K0 595 793 KLO with motor I installed.
User avatar
neil278
100BHP+
Posts: 148
Joined: Sat Aug 17, 2019 7:29 pm
Engine size/power: 1.9 TDI (104bhp)

Re: SWB MK3 1.9TDi Build thread

Post by neil278 »

Didn’t realise I had some replies on this thread 8)

Glad the info has helped some fellow caddy owners out
User avatar
akerstrom
Caddy2k Groupie
Posts: 12
Joined: Thu Jul 22, 2021 10:57 pm
Engine size/power: 1.9 TDI (104bhp)
Location: Sweden

Re: SWB MK3 1.9TDi Build thread

Post by akerstrom »

Do you remember the part number you used to get the steeringwheel buttons to work? I have the same wheel installed and I would love to get the buttons working :)
User avatar
neil278
100BHP+
Posts: 148
Joined: Sat Aug 17, 2019 7:29 pm
Engine size/power: 1.9 TDI (104bhp)

Re: SWB MK3 1.9TDi Build thread

Post by neil278 »

Yer it’s 1k0953549CH

To use the buttons on the right hand side you need a multifunction display, as that’s what it controls
User avatar
akerstrom
Caddy2k Groupie
Posts: 12
Joined: Thu Jul 22, 2021 10:57 pm
Engine size/power: 1.9 TDI (104bhp)
Location: Sweden

Re: SWB MK3 1.9TDi Build thread

Post by akerstrom »

Thanks!
I have the mfd from factory so all good there.
Great looking build :D
szybkilopez15
Caddy2k Groupie
Posts: 1
Joined: Sat Oct 21, 2023 6:52 pm
Engine size/power: 2.0 SDI (70bhp)

Re: SWB MK3 1.9TDi Build thread

Post by szybkilopez15 »

neil278 wrote: Thu Aug 27, 2020 6:08 pm Move pin 11 to 12 - pin 13 to 16 (this wire not present on passenger side) - pin 7 to 6 - pin 15 to 7 and pin 16 to 13. The red and yellow wire from position 12 now needs to go into 18.

Door modules were 5K0 959 792 on the passenger side and 5K0 956 793 on the drivers side
Anyone could let me know what wire colours should go to each pin? previous owner repinned mine wrong and I have got to sort it out
thanks for help
Post Reply