Page 35 of 62

Re: A Good Caddy

Posted: Mon Aug 01, 2022 9:12 am
by FishermansFriend
Thanks Cgiorgi.

Re: A Good Caddy

Posted: Mon Aug 01, 2022 2:31 pm
by Cgiorgi
Do the MK8 seats bolt direct to the Touran bases still, how did you go with the airbags?

Re: A Good Caddy

Posted: Tue Aug 02, 2022 7:02 am
by DW2207
Just when I thought you couldn't do much more to this van mate, one of the best examples on here

Sent from my SM-G981B using Tapatalk


Re: A Good Caddy

Posted: Tue Aug 02, 2022 9:39 am
by FishermansFriend
Hi Cgiorgi, yes they fit on the Touran bases. I already had the seat wiring adapters tommyzooom made for the MK7 seats I had before; and the air bag plug was the same. I had to put a red 17 pin connector plug 4F0972575B on for the seatbelt and seat occupancy sensor and pinned them out using these Current Flow Diagrams.

Re: A Good Caddy

Posted: Tue Aug 02, 2022 9:44 am
by FishermansFriend
Hi DW, thanks very much, tight lines mate.

Re: A Good Caddy

Posted: Tue Aug 02, 2022 3:10 pm
by Cgiorgi
Very clever, good to know it’s not bad of a job to convert them

Re: A Good Caddy

Posted: Tue Aug 02, 2022 8:24 pm
by FishermansFriend
Some new parts delivered today. Carbon charcoal caddy life dash vents and caddy life ratchet arm rest in titan black.

A Good Caddy

Posted: Tue Aug 02, 2022 8:48 pm
by Lister79
Such a good build


Sent from my iPhone using Tapatalk

Re: A Good Caddy

Posted: Tue Aug 02, 2022 9:46 pm
by FishermansFriend
Thanks Lister mate, I'm in the same boat as you, parts to fit but he missus has other ideas :lol:

Re: A Good Caddy

Posted: Wed Aug 03, 2022 2:50 pm
by Cgiorgi
What is the part numbers for the charcoal vents, did you cut the holes out and install the clips?

Re: A Good Caddy

Posted: Wed Aug 03, 2022 10:26 pm
by FishermansFriend
Hi Cgiorgi,

I put the part numbers in the Useful Parts section https://caddy2k.com/forum/viewtopic.php ... 68#p427368

No I didnt cut the dash for the clip, I would have only been able to make use of one of the clips because there was nothing there for the rest of the clips to clip into, just the empty space above the glove box. They fit in perfect with out the clips and don't move or make any noise.

Having said that I could have swore I seen a picture of a part that fills the empty space above the glove box, and it had holes for all the clips to clip into. But I thought about cutting the hole for the clip so much its possible I dreamt about that part as I searched the parts diagrams and couldn't find it :?

Re: A Good Caddy

Posted: Sat Aug 20, 2022 6:50 pm
by EvilC
FishermansFriend wrote: Tue Aug 02, 2022 8:24 pm Some new parts delivered today. Carbon charcoal caddy life dash vents and caddy life ratchet arm rest in titan black.
Was this a new Touran ratchet armrest in black? If so, do you have a part number? I’m looking at installing exactly the same in mine?

Re: A Good Caddy

Posted: Sat Aug 20, 2022 7:32 pm
by FishermansFriend
Hi, yes they seem to be Touran part numbers but in Titan Black to match the MK4 interior. There are a few parts you need, you can see them in the two parts diagrams below.

Centre console front parts: 7, 11, 10, 13, 14, 20, 21x2, 23, https://www.ilcats.ru/vw/?function=getP ... anguage=en

Centre console armrest parts: 31, 34, 65. https://www.ilcats.ru/vw/?function=getP ... anguage=en

Re: A Good Caddy

Posted: Sun Aug 21, 2022 2:29 pm
by FishermansFriend
VW sharkfin antenna for GPS and radio installed.

Re: A Good Caddy

Posted: Sun Aug 21, 2022 6:26 pm
by EvilC
FishermansFriend wrote: Sat Aug 20, 2022 7:32 pm Hi, yes they seem to be Touran part numbers but in Titan Black to match the MK4 interior. There are a few parts you need, you can see them in the two parts diagrams below.

Centre console front parts: 7, 11, 12, 13, 14, 20, 21x2, 23, https://www.ilcats.ru/vw/?function=getP ... anguage=en

Centre console armrest parts: 31, 34, 65. https://www.ilcats.ru/vw/?function=getP ... anguage=en
Thank you so much for this. I’ve got all the parts into a basket at lllparts.co.uk but a few part numbers just don’t register on their system. Can I ask, where did you get all the bits from? Did you use the Russian site ilcats? I couldn’t find a translate option or drop down to use an English speaking version.